欢迎进入融创设备(佛山)有限公司网站!
中文  |  ENGLISH  |  Site Map  |  RSS

产品列表

  • 熔炼炉 Melting furnace
  • 保温炉 Holding furnace
  • 均质炉 Homogenizing furnace
  • 铝棒铸造平台 Hot top casting table
  • 油气润滑模铸造 Oil and air lubricated casting system
  • 铸造机器与系统 Casting machine and system
  • 铝棒切割机 Billet cutting machine
  • 联系我们

    博斯特融创设备(佛山)有限公司

    地址:中国 广东省 佛山市 南海区 狮山镇狮山工业园北区

    联系: 周生生

    手机:+86 153 6002 0678

    电话: +86 0757 8668 7080 
    传真:+86 0757 8668 7068



    新闻动态

    ALUMINIUM TOWER MELTING FURNACE

    作者:博斯特融创科技 来源:博斯特融创科技 日期:2017-07-31 人气:1095

    Foshan Huitai Melting Furnace is a complete centralised aluminium melting furnace where it incorporate melting and holding "6 in 5" system. The solid aluminium material is charge to the tower of the furnace by a lifting charger. The unmelted material is eliminated as the tower has specific melting hearth section. the aluminium molten is then stored at the holding chamber. the molten temperature is maintained by a holding burner. Due to a large holding chamber capacity, the furnace will offer a great advantage as it can dispersing a large quantity of molten at any time required. 


    The Melting Furnace is most suitable for centralised melting at a rate of 1t/h to 3t/h. Only the best selected refractories and insulaton are used for building this furnace especially the dry hearth area where the impact of the solid aluminium comes to contact with the dry hearth during charging. a selection of diesel, natural gas or both combination of burner could be fitted into the Melting Furnace to the customer requirement. The fully automated of the control system will ensure that the molten level to be maintained at optimum level set at all time. it is due to the modutrol motor controlling the melting burner where it receive a signal from the level sensor stating the molten level at that point. 

    下一个: aluminium melting and casting house
    ×